Skip to main content
Image

DX®10
Metal-Polymer Plain Bearings Grease Lubricated

GGB DX10 cylindrical bushes for heavy duty and harsh environments
GGB DX10 Plain bearing and cylindrical bushes for heavy duty and harsh environments
GGB DX10 metal-polymer special washer for heavy duty and harsh environments
GGB DX10 metal-polymer Cylindrical bush with groove and bore for heavy duty and harsh environments

Product's benefits

  • Chemical Resistance
    Chemical Resistant
  • Suitable for Continuous Sliding Rotation
    Suitable for Continuous Sliding, Rotating and Oscillating Movement
  • Reduced System Cost
    Reduced System Cost
  • Quality and Reliability
    Quality/Reliability
  • Lubricated Operation
    Lubricated Operation
  • Increased Wear Resistance
    Increased Wear Resistance
  • Extended Service Life
    Extended Service Life
  • Extended Component Life Cycle
    Extended Component Life Cycle

Characteristics

  • Perfect for heavy duty and harsh environments
  • Excellent chemical resistance
  • Excellent erosion resistance
  • Good fatigue strength
  • Good wear performance
  • Can be broached for tighter tolerance
  • Lead-free material compliant to ELV, RoHS and WEEE specifications
 
AVAILABILITY

Bearing forms made to order: cylindrical bushes, thrust washers, sliding plates, half-bearings, special shapes obtained by stamping, bearings with locating notches, lubricant holes and machined grooves, customized bearing designs

Datasheet
GGB DX10 - Metal-Polymer Plain Bearing Material Grease Lubricated
Brochure
GGB DX10 - Metal-Polymer - Maintenance-Free Bushings for High Loads

Operating performance

Choose the product I want to compare
DX®10
Dry Operation Fair
Lubricated Operation Very Good
Greased Operation Very Good
Machinable Applicable
RoHS Compliant Compliant
Standard Sizes Not Available
Application Excellence
DX®
Poor
Good
Very Good
Applicable
Compliant
Available
HI-EX®
Fair
Good
Very Good
Applicable
Compliant
Not Available
DS
Good
Very Good
Very Good
Applicable
Compliant
Not Available

Composition

  • Metal-Polymer Composite Material with DuraStrong™ Technology 
  • Steel Back + Porous Bronze Sinter +
  • High-Tech Polymer

Technical specifications

  • General

    BEARING PROPERTIES Value Unit
    Maximum load, p
    - Static 250 36,000 N/mm2 psi
    - Dynamic 140 20,000 N/mm2 psi
    Operating Temperature
    - Min -40 -40 °C °F
    - Max 175 350 °C °F
    Grease Lubricated
    Maximum sliding speed, U 2.5 500 m/s fpm
    Maximum pU factor 2.8 80,000 N/mm² x m/s psi x fpm
    Coefficient of friction, f 0.01-0.10 0.01-0.10
    Oil Lubricated
    Maximum sliding speed, U 10.0 2,000 m/s fpm
    Maximum pU factor 2.8 80.000 N/mm² x m/s psi x fpm
    Coefficient of friction, f 0.01-0.06 0.01-0.06
    Recommendations
    Shaft surface roughness, Ra ≤ 0.4 ≤ 16 µm µin
    Shaft surface hardness
    - Normal > 200 > 200 HB HB
    - For longer service life > 350 > 350 HB HB
    For Superior Performance Value
    Dry GAR-MAX / HSG / GAR-FIL / MLG
    Water Lubricated HPF / HPM / DP4-B
    Process fluid lubricated DP4 / HI-EX / GAR-FIL

Need advice?

Our experts are ready to help you find the right solution for your specific application.